Friday, November 6, 2009
Saturday, October 31, 2009
Winner's college video in AAGAAZ-09
This video got 1st position in AAGAAZ-09 . The winner is Eshan Maheshwari and Ashish kumar (BBD)
SPONSERED BY :- e-soft technologies and Cetpa
SPONSERED BY :- e-soft technologies and Cetpa
Friday, October 30, 2009
Winner's List of AAGAAZ -2009
TECHNICAL EVENTS
(1.)Savitech
1st - Ravi kumar pandey (NIEC,EC22)
2nd - Aniket (BBD,EC31)
3rd - Asim Siddiqui (NIEC,EC21)
(2).Khurpechiya
1st - Aniket (BBD,EC31)
2nd - Ashutosh Sharma (NIEC,EC31)
3rd - Vineet Mishra (BBD,EC32)
(3).Technakshari
1st -
Deepti (NIEC,EC)
Akamsha Agarwal (NIEC,EC)
Deeti Das (NIEC,EC)
Sqkshi Srivastava (NIEC,EC)
Vasumdhara Verma (NIEC,EC)
2nd -
Vaibhav (BBD,EC)
Aviral Verma (BBD,EC)
Aniket (BBD,EC)
Ankur Kumar (BBD,EN)
Rajnesh Upadhyay(BBD,EC)
3rd -
Shachi (BBD,civil)
Urvashi (BBD,civil)
Kritika (BBD,civil)
LITERARY EVENTS
(1).Turn-Coat
1st - Debashish Sarkar (NIEC,EC31)
2nd - Kritika Gupta (BBD)
3rd - Yash Sai Pathak (NIEC)
(2).Photo-captioning
1st - Prashant Kargeti (NIEC,EC22)
2nd - Zainab Hussain (BBD,EC21)
3rd - Animesh Singh Pathak (BBD,B8)
(3).Speed Sketching
1st - Ankit Gupta (BBD,B.arch)
2nd - Raj Mukul
3rd - Ridam (BBD,B.arch)
CULTURAL EVENTS
(1).Ulta-Pulta
1st - Jatin Dua (BBD,EC31)
2nd - Swetchha shukla (NIEC,EC22)
3rd - Avnish Singh (BBD)
(2).Ad-Mad
1st -
Jatin Dua (BBD,EC31)
Akhil (BBD,EC31)
2nd -
Alok Kumar Singh (NIEC,IT21)
D.Shiv Sai (NIEC,IT21)
(3).Zabaan-par-Lagaam
1st -
Pragati (NIEC,EC21)
Kanika (NIEC,EC21)
Atika (NIEC,EC22)
2nd -
Mohd. Anwar Khan (NIEC,IT32)
Shahwaz khan (NIEC,IT32)
Devashish (NIEC,EC31)
(4).College Video
1st -
Eshan Maheshwari (BBD)
Ashish Kumar (BBD)
(5).Rubic’s Cube
1st - Deepak Prakash (NIEC EE31)
(6).Girls vs. Boys Gullyy Cricket Match
1st -
Kritika Awasthi and group
2nd -
Shashi Prakash Mishra and group
SPONSERED BY :- e-soft technologies and Cetpa
(1.)Savitech
1st - Ravi kumar pandey (NIEC,EC22)
2nd - Aniket (BBD,EC31)
3rd - Asim Siddiqui (NIEC,EC21)
(2).Khurpechiya
1st - Aniket (BBD,EC31)
2nd - Ashutosh Sharma (NIEC,EC31)
3rd - Vineet Mishra (BBD,EC32)
(3).Technakshari
1st -
Deepti (NIEC,EC)
Akamsha Agarwal (NIEC,EC)
Deeti Das (NIEC,EC)
Sqkshi Srivastava (NIEC,EC)
Vasumdhara Verma (NIEC,EC)
2nd -
Vaibhav (BBD,EC)
Aviral Verma (BBD,EC)
Aniket (BBD,EC)
Ankur Kumar (BBD,EN)
Rajnesh Upadhyay(BBD,EC)
3rd -
Shachi (BBD,civil)
Urvashi (BBD,civil)
Kritika (BBD,civil)
LITERARY EVENTS
(1).Turn-Coat
1st - Debashish Sarkar (NIEC,EC31)
2nd - Kritika Gupta (BBD)
3rd - Yash Sai Pathak (NIEC)
(2).Photo-captioning
1st - Prashant Kargeti (NIEC,EC22)
2nd - Zainab Hussain (BBD,EC21)
3rd - Animesh Singh Pathak (BBD,B8)
(3).Speed Sketching
1st - Ankit Gupta (BBD,B.arch)
2nd - Raj Mukul
3rd - Ridam (BBD,B.arch)
CULTURAL EVENTS
(1).Ulta-Pulta
1st - Jatin Dua (BBD,EC31)
2nd - Swetchha shukla (NIEC,EC22)
3rd - Avnish Singh (BBD)
(2).Ad-Mad
1st -
Jatin Dua (BBD,EC31)
Akhil (BBD,EC31)
2nd -
Alok Kumar Singh (NIEC,IT21)
D.Shiv Sai (NIEC,IT21)
(3).Zabaan-par-Lagaam
1st -
Pragati (NIEC,EC21)
Kanika (NIEC,EC21)
Atika (NIEC,EC22)
2nd -
Mohd. Anwar Khan (NIEC,IT32)
Shahwaz khan (NIEC,IT32)
Devashish (NIEC,EC31)
(4).College Video
1st -
Eshan Maheshwari (BBD)
Ashish Kumar (BBD)
(5).Rubic’s Cube
1st - Deepak Prakash (NIEC EE31)
(6).Girls vs. Boys Gullyy Cricket Match
1st -
Kritika Awasthi and group
2nd -
Shashi Prakash Mishra and group
SPONSERED BY :- e-soft technologies and Cetpa
Saturday, October 24, 2009
Topics for “ SAVITECH ” in AAGAAZ
There are five topics in “ SAVITECH ” ,from this you have to submit your synopsis maximum of 4 pages and then after you have to prepare your .ppt presentation and it will be of 10 mins.
The topics are as follows :-
(1). 4G - Technology.
(2). DOHC (Dual overhead camshaft).
(3). Nanobots.
(4). Criptography.
(5). Solid waste management.
There is a sample of synopsis is given on "LIGHT EMITTING POLYMER".
Introduction:
The seminar is about polymers that can emit light when a voltage is applied to it. The structure comprises of a thin film of semiconducting polymer sandwiched between two electrodes (cathode and anode).When electrons and holes are injected from the electrodes, the recombination of these charge carriers takes place, which leads to emission of light .The band gap, ie. The energy difference between valence band and conduction band determines the wavelength (colour) of the emitted light.
They are usually made by ink jet printing process. In this method red green and blue polymer solutions are jetted into well defined areas on the substrate. This is because, PLEDs are soluble in common organic solvents like toluene and xylene .The film thickness uniformity is obtained by multi-passing (slow) is by heads with drive per nozzle technology .The pixels are controlled by using active or passive matrix.
The advantages include low cost, small size, no viewing angle restrictions, low power requirement, biodegradability etc. They are poised to replace LCDs used in laptops and CRTs used in desktop computers today.
Their future applications include flexible displays which can be folded, wearable displays with interactive features, camouflage etc.
What is LEP?
It is a polymer that emits light when a voltage is applied to it. The structure comprises a thin-film of semiconducting polymer sandwiched between two electrodes (anode and cathode) as shown in fig.1. When electrons and holes are injected from the electrodes, the recombination of these charge carriers takes place, which leads to emission of light that escapes through glass substrate. The bandgap, i.e. energy difference between valence band and conduction band of the semiconducting polymer determines the wavelength (colour) of the emitted light.
Construction :
Light-emitting devices consist of active/emitting layers sandwiched between a cathode and an anode. Indium-tin oxides typically used for the anode and aluminum or calcium for the cathode. Fig.2.1(a) shows the structure of a simple single layer device with electrodes and an active layer.
Single-layer devices typically work only under a forward DC bias. Fig.2.1(b) shows a symmetrically configured alternating current light-emitting (SCALE) device that works under AC as well as forward and reverse DC bias.
In order to manufacture the polymer, a spin-coating machine is used that has a plate spinning at the speed of a few thousand rotations per minute. The robot pours the plastic over the rotating plate, which, in turn, evenly spreads the polymer on the plate. This results in an extremely fine layer of the polymer having a thickness of 100 nanometers. Once the polymer is evenly spread, it is baked in an oven to evaporate any remnant liquid. The same technology is used to coat the CDs.
Advantages and Disadvantages :
Advantages:-
• Require only 3.3 volts and have lifetime of more than 30,000 hours.
• Low power consumption.
• Self luminous.
• No viewing angle dependence.
• Display fast moving images with optimum clarity.
• Cost much less to manufacture and to run than CRTs because the active material is plastic.
• Can be scaled to any dimension.
• Fast switching speeds that are typical of LEDs.
• No environmental draw backs.
• No power in take when switched off.
• All colours of the visible spectrum are possible by appropriate choose of polymers.
• Simple to use technology than conventional solid state LEDs and lasers.
• Very slim flat panel.
Disadvantages
• Vulnerable to shorts due to contamination of substrate surface by dust.
• Voltage drops.
• Mechanically fragile.
• Potential not yet realized.
Applications
Polymer light-emitting diodes (PLED) can easily be processed into large-area thin films using simple and inexpensive technology. They also promise to challenge LCD's as the premiere display technology for wireless phones, pagers, and PDA's with brighter, thinner, lighter, and faster features than the current display.
SPONSERED BY :- e-soft technologies and Cetpa
The topics are as follows :-
(1). 4G - Technology.
(2). DOHC (Dual overhead camshaft).
(3). Nanobots.
(4). Criptography.
(5). Solid waste management.
There is a sample of synopsis is given on "LIGHT EMITTING POLYMER".
Introduction:
The seminar is about polymers that can emit light when a voltage is applied to it. The structure comprises of a thin film of semiconducting polymer sandwiched between two electrodes (cathode and anode).When electrons and holes are injected from the electrodes, the recombination of these charge carriers takes place, which leads to emission of light .The band gap, ie. The energy difference between valence band and conduction band determines the wavelength (colour) of the emitted light.
They are usually made by ink jet printing process. In this method red green and blue polymer solutions are jetted into well defined areas on the substrate. This is because, PLEDs are soluble in common organic solvents like toluene and xylene .The film thickness uniformity is obtained by multi-passing (slow) is by heads with drive per nozzle technology .The pixels are controlled by using active or passive matrix.
The advantages include low cost, small size, no viewing angle restrictions, low power requirement, biodegradability etc. They are poised to replace LCDs used in laptops and CRTs used in desktop computers today.
Their future applications include flexible displays which can be folded, wearable displays with interactive features, camouflage etc.
What is LEP?
It is a polymer that emits light when a voltage is applied to it. The structure comprises a thin-film of semiconducting polymer sandwiched between two electrodes (anode and cathode) as shown in fig.1. When electrons and holes are injected from the electrodes, the recombination of these charge carriers takes place, which leads to emission of light that escapes through glass substrate. The bandgap, i.e. energy difference between valence band and conduction band of the semiconducting polymer determines the wavelength (colour) of the emitted light.
Construction :
Light-emitting devices consist of active/emitting layers sandwiched between a cathode and an anode. Indium-tin oxides typically used for the anode and aluminum or calcium for the cathode. Fig.2.1(a) shows the structure of a simple single layer device with electrodes and an active layer.
Single-layer devices typically work only under a forward DC bias. Fig.2.1(b) shows a symmetrically configured alternating current light-emitting (SCALE) device that works under AC as well as forward and reverse DC bias.
In order to manufacture the polymer, a spin-coating machine is used that has a plate spinning at the speed of a few thousand rotations per minute. The robot pours the plastic over the rotating plate, which, in turn, evenly spreads the polymer on the plate. This results in an extremely fine layer of the polymer having a thickness of 100 nanometers. Once the polymer is evenly spread, it is baked in an oven to evaporate any remnant liquid. The same technology is used to coat the CDs.
Advantages and Disadvantages :
Advantages:-
• Require only 3.3 volts and have lifetime of more than 30,000 hours.
• Low power consumption.
• Self luminous.
• No viewing angle dependence.
• Display fast moving images with optimum clarity.
• Cost much less to manufacture and to run than CRTs because the active material is plastic.
• Can be scaled to any dimension.
• Fast switching speeds that are typical of LEDs.
• No environmental draw backs.
• No power in take when switched off.
• All colours of the visible spectrum are possible by appropriate choose of polymers.
• Simple to use technology than conventional solid state LEDs and lasers.
• Very slim flat panel.
Disadvantages
• Vulnerable to shorts due to contamination of substrate surface by dust.
• Voltage drops.
• Mechanically fragile.
• Potential not yet realized.
Applications
Polymer light-emitting diodes (PLED) can easily be processed into large-area thin films using simple and inexpensive technology. They also promise to challenge LCD's as the premiere display technology for wireless phones, pagers, and PDA's with brighter, thinner, lighter, and faster features than the current display.
SPONSERED BY :- e-soft technologies and Cetpa
Friday, October 23, 2009
Information about AAGAAZ
(1). Participants can send an SMS or make a CALL to the CONTACT No. given after each of the EVENTS . They will be required to send the SMS in the following FORMAT…
SAVITUR_NAME of the EVENT in which the student wants to participate_Student’s NAME_Section & Year_college name
(2). Participants can come to the E&C Engg. Floor in NIEC at anytime between 12:30 p.m. to 2:30 p.m. and can register in their desired event. Registration Desk will be there for the stipulated time period on each of the days. ( ON THE SPOT registrations will also be considered on the Event days.)
(3). Participants will have to pay the registration fees at the time of registration, or in the case if they are registering through SMS, they will have to pay the fees at the time they would come for participating in the events. ( Registration fees will be Rs. 10/- only)
Technical Events :
(1). “ SAVITECH ” :– [for registration / SMS (in the given format) on / CALL on : 9453312826 ]
( Topics will be given to the registering candidates when they will register, on any one of those topics, they will have to submit a 4 page (maximum) synopsis in the 1st round. The selected candidates in this round will be informed and they will have to prepare a powerpoint presentation for the 2nd round, details of the 2nd and 3rd rounds will be conveyed to the selected participants of the 1st round
1st round – Synopsis Submission.
2nd round – Powerpoint presentation.
3rd round – Technical and Personal Interview by Faculties.
For Topics in "SAVITECH".....click here.
(2). “ KHURPECH-iya ” :– [for registration / SMS (in the given format) on / CALL on : 9453314807 ]
( This event will be a technical TIPS and TRICKS and practicalities based written quiz , 50 questions, objective type.)
(3). “ TECHN-akshari ” :- [for registration / SMS (in the given format) on / CALL on : 9532753399 ]
( This will be a technical words / terms based technical antakshari type event , a team of 5 can register, individual participants can register too, teams will be provided to the individual participants).
Literary Events :
(1). “ Turn-Coat ” :- [for registration / SMS (in the given format) on / CALL on : 9453314807 ]
( This will be a 2 min. speech contest, in this the participant will be given a topic and the participant will have to speak in FAVOUR of the topic for 1 minute and then AGAINST the topic for the another 1 minute.)
(2). “Photo-Captioning” :– [for registration / SMS (in the given format) on / CALL on : 9453314807 ]
( In this event, the participants will have to WRITE CAPTIONS for the Photographs, which will be shown to them through projectors.)
(3). “ Speed Sketching/Painting ” :- [for registration / SMS (in given format) on / CALL on : 9807189286]
( In this event the participants will have to speedily sketch / paint on the given topic in the given time ).
Cultural/General Events :
(1). “Ulta-Pulta” :- [for registration / SMS (in the given format) on / CALL on : 9807189286 ]
( This will be a singing contest in which the participants will need to sing a song in tune of any other song)
(2). “ AD-MAD ” :- [for registration / SMS (in the given format) on / CALL on : 9453601185 ]
(3). “ Zabaan-par-Lagaam ” :- [for registration / SMS (in the given format) on / CALL on : 9453601185]
(This will be an event in which 3 participants ( either a team, or 3 individual participants will be grouped) will be given different broken parts of a complete sentence and they will have to tell the sentence parts to each other without speaking or writing and will have to complete the sentence.)
(4). “College Video” :- [for registration / SMS (in given format) on / CALL on : 9451007374]
(The candidates will need to take the guidelines from the coordinator available on the contact no. above )
(5). “Rubic’s Cube” :- [for registration / SMS (in given format) on / CALL on : 9451007374]
( Rubic’s Cube Puzzle Solving contest ). (The candidates will need to take the guidelines from the coordinator available on the contact no. above )
(6). “ GIRLS vs. BOYS Gullyy Cricket Match ” :- [for registration / SMS (in given format) on / CALL on
: 9451007374 ]
( The participants can come with a team of 5, individual candidates can also register, REST DETAILS CAN BE TAKEN BY MAKING A CALL on the above stated Contact No.)
All the events will be held in the time period of 12:30pm to 2:30pm i.e. the Lunch timings.
“ SAVITECH ” : 1st round on: Synopsis Submission on 26th of Oct’09.
2nd round on: Powerpoint presentation on 27th of Oct’09.
3rd round on: Technical and Personal Interview by Faculties on 28th Oct’09.
“ KHURPECH-iya ” – Date of conduction: 27th of Oct’09.
“ TECHN-akshari ” - Date of conduction: 27th of Oct’09
“ Turn-Coat ” - Date of conduction: 26th of Oct’09.
“Photo-Captioning” - Date of conduction: 26th of Oct’09.
“ Speed Sketching/Painting ” - Date of conduction: 28th of Oct’09.
“Ulta-Pulta” - Date of conduction: 28th of Oct’09.
“ AD-MAD ” - Date of conduction: 28th of Oct’09.
“ Zabaan-par-Lagaam ” - Date of conduction: 26th of Oct’09.
“ College Video ” - Event will be conducted on all the days i.e. from 26th to 28th of Oct’09.
“ Rubic’s Cube ” - Event will be conducted on all the days i.e. from 26th to 28th of Oct’09.
“ GIRLS vs. BOYS Gullyy Cricket Match ” - Date of conduction: 27th of Oct’09.
The PRIZE DISTRIBUTION CEREMONY will be held in the AUDITORIUM on 29th of Oct’09. ( timings will be from 12:30pm to 2:30 pm )
Feel free to CALL on 9451007374 or 9453314807 FOR ANY TYPE of QUERIES regarding the events.
SPONSERED BY :- e-soft technologies and Cetpa
AAGAAZ -(chase the dream not the competition)
Technical Events:
(1).“ SAVITECH ” :–
( Topics will be given to the registering candidates when they will register, on any one of those topics, they will have to submit a 4 page (maximum) synopsis in the 1st round. The selected candidates in this round will be informed and they will have to prepare a powerpoint presentation for the 2nd round, details of the 2nd and 3rd rounds will be conveyed to the selected participants of the 1st round
1st round – Synopsis Submission.
2nd round – Powerpoint presentation.
3rd round – Technical and Personal Interview by Faculties.
For Topics in "SAVITECH".....click here.
(2).“ KHURPECH-iya ” :–
( This event will be a technical TIPS and TRICKS and practicalities based written quiz , 50 questions, objective type.)
(3).“ TECHN-akshari ” :-
( This will be a technical words / terms based technical antakshari type event , a team of 5 can register, individual participants can register too, teams will be provided to the individual participants).
Literary Events :
(1).“ Turn-Coat ” :-
( This will be a 2 min. speech contest, in this the participant will be given a topic and the participant will have to speak in FAVOUR of the topic for 1 minute and then AGAINST the topic for the another 1 minute.)
(2).“Photo-Captioning” :–
( In this event, the participants will have to WRITE CAPTIONS for the Photographs, which will be shown to them through projectors.)
(3).“ Speed Sketching/Painting ” :-
( In this event the participants will have to speedily sketch / paint on the given topic in the given time ).
Cultural/General Events :
(1).“Ulta-Pulta” :-
( This will be a singing contest in which the participants will need to sing a song in tune of any other song)
(2).“ AD-MAD ” :-
(3).“ Zabaan-par-Lagaam ” :-
(This will be an event in which 3 participants ( either a team, or 3 individual participants will be grouped) will be given different broken parts of a complete sentence and they will have to tell the sentence parts to each other without speaking or writing and will have to complete the sentence.)
(4).“College Video” :-
(5).“Rubic’s Cube” :-
( Rubic’s Cube Puzzle Solving contest ).
(6).“ GIRLS vs. BOYS Gullyy Cricket Match ” :-
SPONSERED BY :- e-soft technologies and Cetpa
Saturday, October 10, 2009
Committee’s Student coordinators
President – Piyush Singh.
Vice President – Satyajeet Banerjee.
Treasurer – Mayank Shukla.
GS (Technical) – Vishwas Tripathi.
JS (Technical) – Malvika Mudgal.
GS (Literary) – Prashant Dwivedi.
JS (Literary) – Shikha Rinchin Tiku.
GS (Cultural) – Shripriyam.
JS (Cultural) – Manish Srivastava.
GS (Media & Publicity) – Ravi Ranjan Prasad.
JS (Media & Publicity) – Anjali Srivastava.
GS (Sports) – Devershi Srivastava.
JS (Sports) – Darpan Bhatia.
Vice President – Satyajeet Banerjee.
Treasurer – Mayank Shukla.
GS (Technical) – Vishwas Tripathi.
JS (Technical) – Malvika Mudgal.
GS (Literary) – Prashant Dwivedi.
JS (Literary) – Shikha Rinchin Tiku.
GS (Cultural) – Shripriyam.
JS (Cultural) – Manish Srivastava.
GS (Media & Publicity) – Ravi Ranjan Prasad.
JS (Media & Publicity) – Anjali Srivastava.
GS (Sports) – Devershi Srivastava.
JS (Sports) – Darpan Bhatia.
Subscribe to:
Posts (Atom)